In this illustration we will going to wire the Arduino Board to build a remote switching using the NORDIC NRF24l01 2.4GHz Transceiver. The NRF24l01 will act as a remote controller to other NRF24L01. Both the master and the slave will
Wiring and flashing the ESP8266 ESP201 WiFi Transceiver
This is the other model of ESP8266 module, this board has similarity with the ESP8266 V1, ESP8266 7, ESP8266 12E, the difference of this board has an on-board SMD SMC antenna and extra IO port, this module has self-contained SOC
Wiring the solenoid with TIP120 Transistor To Higher Load
In this illustration we will going to drive the solenoid with the input voltage of 12v to 24v using TIP120 Transistor. Because Arduino can only support power output of 3.3 and 5v this is not enough to work with the
Wiring the Line finder Sensor with Arduino
In this illustration we will going to wire the Line Finder Sensor Module HCARDUXXXX5. This module requires only DIO pin defined as an input) to work. When the sensor detects a dark line it will trigger the signal into HIGH,
Wiring the Obstacle Avoidance Sensor Module Board
Another illustration that very useful building an obstacle bot or a project that used obstacle avoidance. This module allows for sensing of solid objects within a fixed range it is actually an adjustable with on-board potentiometer. This guide is guide
Wiring the TCS320 / TCS230 Color Detection with Arduino
This illustration we will going to wire the TCS230/TCS3200 chip module board this boards is designed to detect the colors, it has an array of photodiode 8×8 matrix. These photodiodes are covered with four type of filters. The TCS230/TCS320 converts
Wiring MOSFET module board on Higher Loads with Motor
In this illustration we will going to wire the IRF520 MOSFET (Metal Oxide Semiconductor Field-effect Transistor) Module Board a simple breakout board for driving higher loads. MOSFET enables you to control higher voltage projects on microcontroller. MOSFET is also kind
Wiring the ENC28J60 Ethernet Module on Arduino with Relay
In this illustration we will going to wire the ENC28J60 Ethernet Module. This module is another widely used network module for popular microcontroller, the early Arduino network module is accomplished by mean of ENC28J60, although later a new Arduino network
Wiring Thermistor Based Temperature Sensor with or without Arduino
In this illustration we will going to wire the Digital Thermal / Temperature Sensor Module with Thermistor in Arduino, this module can be used to sense temperature or heat. It can be used either with or without Arduino, as you
Wiring 3 Color RGB SMD Common Cathode LED
This is the SMD RGB LED Common Cathode Module, These module has 3 separate LEDs the Red, Green and Blue which can be individually driven by applying a voltage to the appropriate module pin this example code is uses the
Wiring the 315Mhz TX and RX RF link Module with Arduino
The wireless TX (Transmitter) RX (Receiver) pair operates at 315 MHz radio frequency, they can easily plug and test into a solder less breadboard and work well with microcontroller to create a simply wireless radio data link. This 315 MHz
Wiring Hall Effect Sensor Switch Magnet Detector Module
In these illustration we will going to wire the Hall-Effect Switch in our Arduino board. Hall-effect switch are monolithic integrated circuit with tither magnetic specification, designed to operate continuously over temperature +150 degree Celsius and are more stable with both