The DRV8880 is a 2A stepper motor driver with integrated auto tune, support STEP/DIR interface up to 1~16 micro stepping indexer that runs on 6.5 to 45v range. These device can be use in Automatic Teller, Money Handling Machine, Security
Wiring TI DRV8833 H-Bridge DC/Stepper Motor Driver
The DRV8833 is almost similar to DRV8871 it has also H-Bridge current control motor driver and also can drive a DC Motors and 1 Stepper Motor, solenoids, or other inductive loads. The difference between DRV8833 and DRV8871 is pin configuration
Wiring TI DRV8871 Brushed Motor Driver with PWM Sense
The Texas Instruments DRV8871 is a 3.6A brushed DC motor driver with internal current sense / pulse with modulation control. This device is suitable use for printers, industrial equipment’s, mechatronics, appliances, etc. This device as 2 logic input to control
14CORE Mini Sumo Robot with Multi-senors on Arduino Microcontroller
This is the 14CORE Mini sumobot driven by Arduino Microcontroller. this bot is programmed automatically find its opponents and automatically push the opponent out of the black circle, however this robots are equipped with sensors programmed to search and look
Wiring Multiple Sliding Potentiometer on Microcontroller
This is the sliding Potentiometer that provides intuitive benefits in to control and adjusting a resistance. For example controlling UP and DOWN, FORWARD and REVERSE, LEFT and RIGHT sometimes using Rotary Potentiometer is confusing. Slider potentiometer has a logarithmic taper
14CORE Line Following BOT with TCRT5000/L298N on Microcontroller
This is the 14CORE Design Line Following robot which is capable of detecting lines and follow it. This robot uses TCRT5000 Sensor which is capable of emitting dark color lines. The TCRT5000 are reflective sensors which include an infrared emitter
14CORE Light Tracking/Finder BOT on L298N / L293D with Microcontroller
ÞThis is the 14CORE Design light finder robot which is capable of detecting, finding and following light source path. This robot uses LDR (Photodiodes) to detect light from the surroundings and follow where the light source. As you can see
Using Arduino PWM Pulse with Modulation
The PWM or Pulse width Modulation can be used on the Arduino is several ways. In this guide explain how PWM work and techniques, as well as how to use the PWM registers directly to the Arduino board and control
Wiring MOSFET module board on Higher Loads with Motor
In this illustration we will going to wire the IRF520 MOSFET (Metal Oxide Semiconductor Field-effect Transistor) Module Board a simple breakout board for driving higher loads. MOSFET enables you to control higher voltage projects on microcontroller. MOSFET is also kind
Wiring L293D UNO/MEGA Shield with Stepper Motor
The L293D is a dedicated module to fit in Arduino UNO R3 Board, and Arduino MEGA, It is actually a motor driver shield that has full featured Arduino Shield can be used to drive 2 to 6 DC motor and
Controlling the L293D UNO/MEGA Shield with DC Motors
The L293D is a dedicated module to fit in Arduino UNO R3 Board, and Arduino MEGA, It is actually a motor driver shield that has full featured Arduino Shield can be used to drive 2 to 6 DC motor and
Using L298n H Bridge with Stepper Motors on Arduino
The L298 Dubai H Bridge is base on l298 Chip manufacture by ST Semiconductor. The l298 is an integrated monolithic circuit in a 15 lead multi-watt and power S020 package. It is a high voltage and high current full dual