This is the PCF8574AP consists of an 8-bit quasi-bidirectional port and an i2C Serial Bus Interface. The PCF8574AP has a low current consumption and includes latched output with HIGH consumption and include latched output with high current drive capability for
Wiring the i2C BMP180 Barometric Pressure Sensor with Microcontroller
The BMP180 a successor of BMP085 a new generation of high precision, ultra-low power digital pressure sensor. The BMP180 is optimized for use in mobile devices, PDA, GPS navigation and outdoor equipment with a low altitude noise of merely 0.25m
Wiring the I2C / SPI OLED Monochrome Display with RPI
Another guide for wiring the OLED 128×64 Display Monochrome on Raspberry Pi. These display module has only 0.96” diagonal made of 128×64 OLED pixels, this module it works without backlight can be visible in the dark environment, and OLED display
Wiring DIGISPARK ATTINY85 with 096″ OLED Display Screen
In this illustration we will going to wire the ATTINY85 to control the OLED Screen using i2C Bus on ATTINY85 Microcontroller, I will just give an introduction what is ATTNY85 Microcontroller. The ATTINY 25,45, and 85 is a low power
nRF24l01 I2C/TWI (2 Wire Interface) Communication Shield Setup Guide
The I2C/TWI Communication shield module is mainly use and made for nRF24l01 transceiver module, dedicated to provide a reliable performance and to reduce the possibility of data lost in the communication process there are three stages to process a communicate
How to use Bi-Directional Bus / Logic Converter or bridge power communication
The bi-directional logic level converter is very easy to use, this board needs to be powered from two voltage source (HIGH and LOW), the high voltage let say 5v to the HV(High Voltage) pin and the LOW voltage will be