This is the sliding Potentiometer that provides intuitive benefits in to control and adjusting a resistance. For example controlling UP and DOWN, FORWARD and REVERSE, LEFT and RIGHT sometimes using Rotary Potentiometer is confusing. Slider potentiometer has a logarithmic taper
Wiring the TLS2591 High Range LUX / LIGHT Intensity / Ambient Light Sensor on Microcontroller
TLS2591 is high sensitive light to digital converter that transform light intensity into digital signal output that has integrated i2C interface on chip. The TLS2591 combines one infrared-responding photodiode on a single CMOS integrated circuit that has two integrating ADC
Wiring the PCF8574AP 8bit Bidirectional IO Expander Driven i2C Communication Bus / SPI
This is the PCF8574AP consists of an 8-bit quasi-bidirectional port and an i2C Serial Bus Interface. The PCF8574AP has a low current consumption and includes latched output with HIGH consumption and include latched output with high current drive capability for
Wiring the MAX30100 Heart Rate Monitor with Arduino Microcontroller
This is the MAX300100 breakout board that reads heart rate or pulse oximetry. The chip has an integrated optical sensor that derives its reading from emitting two wavelength of light from the two LED’s then measures the absorbance of pulsing
Wiring the ML8511 Ultra Violet Light Sensor on Microcontroller
This is the ML8511 Ultra Violate Light Sensor, which is suitable for acquiring UV intensity indoor or outdoor. The ML8511 equipped with internal amplifier which converts photo-current to voltage depending on UV intensity, and offers you an easy interface to
Wiring the APDS 9930 Ambient Light Sense / APDS 9960 RGB Gesture Sensor with Microcontroller
This is the touch-less gestures sensor a HMI (Human Machine Interface) by swiping your hand over the sensor, which controls a computer, microcontroller, robots or home, automotive, industrial gesture switching or ambient light and color measuring and proximity detections. The
14CORE Obstacle Avoidance Bot with HC-SR04, L293D Shield, SERVO & Arduino Microcontroller
This is the 14core design Obstacle Avoidance BOT with L293D Shield and HC-SR04 and Servo, which is capable of avoiding obstacles using an Ultrasonic Ranging Sensor. The HC-SR04 is economical sensor provides 2cm to 400cm of non-contact measurement functionality with
Wiring a Stand Alone ATMEGA328P CMOS 8Bit Microcontroller
The ATMEGA328P is a CMOS 8Bit Microcontroller based on the AVR enhanced RISC architecture by executing powerful instructions in a single clock cycle. The ATMEGA328P achieves throughout put close to 1MIPS per MHz this empowers system designer to optimize the
14CORE Line Following BOT with TCRT5000/L298N on Microcontroller
This is the 14CORE Design Line Following robot which is capable of detecting lines and follow it. This robot uses TCRT5000 Sensor which is capable of emitting dark color lines. The TCRT5000 are reflective sensors which include an infrared emitter
14CORE Light Tracking/Finder BOT on L298N / L293D with Microcontroller
ÞThis is the 14CORE Design light finder robot which is capable of detecting, finding and following light source path. This robot uses LDR (Photodiodes) to detect light from the surroundings and follow where the light source. As you can see
Wiring The HMI NEXTION TFT Touch Display on 6 Channel Relay Module with Microcontroller
This is the NEXTION HMI a Human Machine Interface device that provides a GUI control of instruments that feeds from your microcontroller. The Nextion is simplified interface to visualize the process between a human and machine, these device is useful
Wiring the 3014/3020/2835/5050/ Analog LED Strip with Bluetooth, Android & Microcontroller
This is another illustration how to wire the Analog Led Strip using PWM on Microcontroller together with Bluetooth module and your Android smart phone. As your can see the diagram below we are using MOSFET to drive higher voltage pointed