NFC (Near-field communication) is a protocol that enable 2 devices to communicate typically smart phone device and NFC tags / devices to establish communication by getting them together range of 4 cm at 1.6 inch defends of usage and antenna
Wiring Flex Sensor with Multiple Servos on Microcontroller
This is the Flexible Sensor/ Flex Sensor. This sensor works on resistance across the sensor when the sensor bend the resistance of the sensor increase the same characteristics on potentiometer / variable resistors. This sensor works on 5v it read
Wiring the VL53L0X ToF Accurate Laser Ranging / Distance Measuring Sensor on Microcontroller
This is the VL53LOX breakout module a type of ToF (Time-of-Flight) laser ranging sensor in smallest package capable of delivering accurate distance measurements whatever the object reflectance compared to conventional measuring sensor, the VL53LOX can measure a distance up to
Wiring the MLX90614 Infrared Contactless Temperature Measurement Sensor on Microcontroller
This Is an Infrared thermometer a non-contact temperature measurement sensor develop by Melexis microelectronics integrated system, code name MLX90614. The MLX90614 has thermopile detector chip and the signal conditioning ASSP are integrated in a low noise amplifier, 17 bit ADS
Wiring the ORP Oxidation-reduction Potential Sensor with pH/ORP Probe on ESP / Arduino Microcontroller
This is ORP OXIDATION-REDUCTION POTENTIAL probe sensor, Oxidation is the loss of pf electrons and reductions and gain electrons. The probe are represented in millivolts can be positive or negative, the same like pH that measures hydrogen ION activity in
Wiring the RCWL0516 Auto Induction Doppler Microwave Radar with ESP8266/32/Arduino
This is RCWL-0516 high sensitivity Automatic Induction Doppler Microwave Radar sensor that can be easily used in conjunction with your favorite microcontroller, single board computers or as standalone detection sensor. The RCWL module it has two parts the microwave frequency
Wiring the A7 / A6 / A6C / A2 / A20 GSM GPRS / GPS WIFI Quad Band 2G GSM Module Board
This is A7, A6C, and A6 is a GSM/GPRS/GPS Module that Supports GSM, GPRS, and GPS Quad-Band 850/900/1800/1900 MHz 2G GSM network worldwide with an SMS, GPRS Class 10 Data Service, and GPS feature and supports digital audio and analog
Wiring HC-21 (M02) 2.4GHz Wi-Fi Serial Universal Asynchronous RX/TX on Microcontroller
This is the HC-21 an embedded Wi-Fi UART module built IEEE802.11 wireless network protocol stacks and TCP/IP protocol to achieve conversation between serial data to wireless network communication. The HC21 can be connected via wireless to wireless without any support
Wiring the Nondispersive Infrared MH-Z14 Carbon Dioxide, Gas Sensor on Microcontroller
This is an MHZ14 NDIR Infrared Gas sensor, design specialize to detect an existence of Carbon Dioxide (C02) in air and non-oxygen defendant. This sensor has a non-dispersive infrared or NDIR principle design in a tight integration of infrared absorbing
Wiring MOC78XX, H206, GP1A57HRJ00F Opto-interrupter for Motor Speed, Direction, Detection Control
This is the photo interrupter also known as photogate, photodiode, or phototransistor. Phototransistors are specially designed transistors with the base region exposed these transistors are light sensitive, especially when an infrared source of light is being used. Phototransistors it has
Wiring the 6 Digit 7 Segment 2.4 Inch HT1621 LCD Display Module on Microcontroller
This is another illustration how to wire the HT621 driven 6 Digit 7 Segment LCD Display on Microcontroller. This module is widely used in multi-meter, voltage monitor, solar power monitor, clock, thermometer, electronic measuring device, automotive, etc. this module is
Wiring Xtrinsic MAG3110 3-AXIS Digital Magnetometer on Microcontroller
This is a Freescale’s three axis, digital magnetometer MAG3110 is a low-power to adopt & reads an orientation an independent electronic compass that can be provide accurate heading information. It uses 400 kHz fast mode i2C serial interface output and