The VL53L1X sensor is a long-range proximity and ranging sensing that base on TOF (Time-of-Flight) unlike IR (Infrared) sensor which measure only signal strength and can be affected by the object reflectivity, compare to VL53L1X its measures directly to a
Wiring the Sensirion SGP30 Multi-pixel Gas Sensor with ATMEGA328TQFP
The SGP30 is a digital multipixel gas sensor designed for easy integration. The SGP30 is a complete sensor on a single chip an integrated i2c data interface with a temperature controlled micro hotplate and two preprocessed indoor air quality signal
Wiring the SENSIRION SDP31, SDP32, SDP36, SDP37 Pressure Sensor with ATMEGA328TQFP
The SENSIRION SDP3X family sensors comes with deferential pressure range of (500Pa, 125Pa) on i2c and analog in a small package. suitable for high-volume applications where size is required on a design project. The SDP3X family ideal for measuring of
Wiring the BOSCH BME680 GAS Detection, Temperature / Humidity & Pressure Sensor
The BME 680 has a low power driver sensor, integrated gas detection, pressure, temperature & humidity sensor in a 4 in 1 extremely compact metal LGA package the most recent development from BOSCH SENSORTEC, the world’s leading manufacturer of MEMS
Wiring MiCs 5524 / 6814 CMOS MEMS Gas Detection Sensor
The basic principle of metal oxide sensors is the resistance of detection layer changes at the presence of the targeted gasses. Oxidizing gases such as ozone or nitrogen di-oxide the resistance will increase and gases such as carbon monoxide the
Wiring Si1133 i2C Ultraviolet / Ambient Light sensor
The Si1133 from Silicon Labs is an Ultraviolet & Ambient Light sensor is operated and controlled through registers accessible using i2c protocol / two wire interface to initiate on-demand UV or Ambient Light measurement. This sensor has integrated photo-elements array,
Wiring the VEML6070 i2C Ultraviolet Light Sensor
The VEML6070 is a cutting-edge UV light sensor with unified i2c / TWI protocol interface designed in a CMOS process. The VEML6070 has an ease of operation via simple command via i2c communication. The ACK (Active Acknowledge) feature with threshold
Sensing Color with VEML6040 RGBW i2C/TWI Color Sensor
This is the VEML6040 i2c driven color sensor that sense RED, GREEN, BLUE, & WHITE (RGBW) light. This device incorporates a photo-diodes, amplifiers, & analog / digital circuitry into a single chip using CMOS process. When using a sensor the
Wiring Sensiron SHTXX Temperature Sensor w/d Python
The Sensiron SHT/SHW is fully calibrated and provide a digital and analog output with an advance series of digital humidity and temperature sensor design for long term stability and high end applications such as mobile, navigation system, environmental, automotive, industrial and
Wiring the APOGEE SU-100 & SI1145 Radiation / UV Probe
This illustration is based on Pyranometer/Actinometer. Pyranometer is a device that measures the solar irradiance of a planar surface or to measure the solar radiation flux density from the hemisphere above within a wavelength range. To achieve this instrument we
Wiring the SFM3000 Mass Flow Meter with 16X2 LCD Screen
This is the SFM3000 a Mass Flow Meter develop by SENSIRION. This can measure a bidirectional flow of air and other non-aggressive gases at rate up to 200slm superb accuracy and extremely high speed output at 14 bit/ 2kHz rate.
Wiring the MAX30150 Particle / Smoke Detection Sensor
This the MAX30105 an integrated particle sensor. This device includes internal LEDs, Photodetectors, Optical Elements, with advance low noise electronics and light blocking. This provides a complete system on chip solution to ease the design process of a smoke detection