This is the LuminOx O2 (Oxygen) RS232 TTL driven sensor a high accuracy fluorescence based optical sensor series, design and develop by SST sensing. This device is capable of detecting and measuring ambient oxygen partial pressure PP02 level using the
Flashing Bootloading STM32 / ARM with microPython
microPython is efficient programming language base to Python 3 its includes a small subset of Python typical library and enhanced to run on microcontroller and contained environments, common in many micro controllers such as Teensy, pyCom, micro:bit, pyBoard, STM, x86,
MAXREFDES131# MAXIM Integrated Grid-Eye IR Array Sensor
This is the MAXREFDES131 an IR array sensing device solution module. This device is mainly driven by 2 components onboard, the Panasonic AMG8833 Grid-Eye and Maxim (DS28E17) a 1 wire-to-i2c master bridge and a dual channel addressable switch along with
TEMT6000 Visible Spectrum / Ambient Light Sensor
This is the TEMT6000 an Ambient Light Sensor which is sensitive to the visible spectrum. Capable of sensing a light brightness around you. The TEMT 6000 is a silicon NPN epitaxial phototransistor in a miniature transparent mold for surface mounting
MS5803-01BA i2C Pressure / Temperature Variometer Sensor
This is MEMS MS5803-01BA this device is a new generation of high resolution altimeter sensor which is integrated with serial peripheral interface (SPI) and i2C (two wire interface) bus interface. The MS5803-01BA-HE is a high endurance pad compare to MS580301BA
Wiring the SPI Electronic Ink / Electronic Paper Display Panel
This is the E-Ink / Paper display device integrated by the image display technology of Microencapsulated Electrophoretic Display (MED). This device has an approach to create a tiny spheres in which the charge color pigments are suspending the transparent electrode
Guide Wiring the 0.95 inch 96×64 RGB OLED Display Module
This is the 0.95 inch 96X64 RGB 65K OLED Display module, driven by SSD1331 via SPI2 Interface distributed by Waveshare. These device is mainly runs on SSD1331 a single chip CMOS OLED/PLED driver at 288 segment and 64 common output
Wiring the SPI 172×72 Gray Shade Electronic Ink (E-INK) Module
This is the E-Ink display module designed for ink display development. This module can work without additional electronic parts you just plug the module directly to your microcontroller. This device has driven by SSD1606 4GS active matrix display driver selectable
Wiring the DRV2605 Haptic Driver for LRA and ERM in I2C/IIC
This is the DRV2605L Haptic Driver for LRA (Linear Resonant Actuator) and ERM (Eccentric Rotating Mass) with effect library and smart loop architecture. This device is licensed version of TouchSense 2200 software from Immersion which eradicates the need to design
Wiring the 128×64 1.3 inch OLED Display on 4 Wire, 3 Wire, i2C Interface
This is the 1.3 inch OLED Display driven by SH1106 from Waveshare, 128×64 resolution, it has integrated 3 interface the 3 wire SPI, 4 wire SPI, and i2C for ease integration in your microcontroller. This OLED is mainly runs by
Wiring the MPL3115A2 Altimeter, Barometer, Temperature MEMS i2C / IIC Sensor
Xtrinsic MPL3115A2 provides a microelectromechanical systems MEMS pressure sensor with integrated i2C interface to provide an accurate Pressure / Altitude and Temperature Data. The sensor output are high resolution 24 bit ADC. Internal processing removes compensation tasks from the host
Wiring the ADNS 3050 Optical Navigation Sensor with Microcontroller
This is Avago Technologies ADNS 3050 Module, ADNS 3050 is small form factor entry-level gaming optical navigation sensor. It is packed in an 8 pin staggered dual in line package DIP. It is capable of high speed motion detection typically