The DRV8833 is almost similar to DRV8871 it has also H-Bridge current control motor driver and also can drive a DC Motors and 1 Stepper Motor, solenoids, or other inductive loads. The difference between DRV8833 and DRV8871 is pin configuration
Wiring TI DRV8871 Brushed Motor Driver with PWM Sense
The Texas Instruments DRV8871 is a 3.6A brushed DC motor driver with internal current sense / pulse with modulation control. This device is suitable use for printers, industrial equipment’s, mechatronics, appliances, etc. This device as 2 logic input to control
Wiring LuminOx O2 / Oxygen RS232 Optical Sensor
This is the LuminOx O2 (Oxygen) RS232 TTL driven sensor a high accuracy fluorescence based optical sensor series, design and develop by SST sensing. This device is capable of detecting and measuring ambient oxygen partial pressure PP02 level using the
MAXREFDES131# MAXIM Integrated Grid-Eye IR Array Sensor
This is the MAXREFDES131 an IR array sensing device solution module. This device is mainly driven by 2 components onboard, the Panasonic AMG8833 Grid-Eye and Maxim (DS28E17) a 1 wire-to-i2c master bridge and a dual channel addressable switch along with
TEMT6000 Visible Spectrum / Ambient Light Sensor
This is the TEMT6000 an Ambient Light Sensor which is sensitive to the visible spectrum. Capable of sensing a light brightness around you. The TEMT 6000 is a silicon NPN epitaxial phototransistor in a miniature transparent mold for surface mounting
MS5803-01BA i2C Pressure / Temperature Variometer Sensor
This is MEMS MS5803-01BA this device is a new generation of high resolution altimeter sensor which is integrated with serial peripheral interface (SPI) and i2C (two wire interface) bus interface. The MS5803-01BA-HE is a high endurance pad compare to MS580301BA
Wiring the SPI 172×72 Gray Shade Electronic Ink (E-INK) Module
This is the E-Ink display module designed for ink display development. This module can work without additional electronic parts you just plug the module directly to your microcontroller. This device has driven by SSD1606 4GS active matrix display driver selectable
Wiring the DRV2605 Haptic Driver for LRA and ERM in I2C/IIC
This is the DRV2605L Haptic Driver for LRA (Linear Resonant Actuator) and ERM (Eccentric Rotating Mass) with effect library and smart loop architecture. This device is licensed version of TouchSense 2200 software from Immersion which eradicates the need to design
Wiring the 128×64 1.3 inch OLED Display on 4 Wire, 3 Wire, i2C Interface
This is the 1.3 inch OLED Display driven by SH1106 from Waveshare, 128×64 resolution, it has integrated 3 interface the 3 wire SPI, 4 wire SPI, and i2C for ease integration in your microcontroller. This OLED is mainly runs by
Wiring the MPL3115A2 Altimeter, Barometer, Temperature MEMS i2C / IIC Sensor
Xtrinsic MPL3115A2 provides a microelectromechanical systems MEMS pressure sensor with integrated i2C interface to provide an accurate Pressure / Altitude and Temperature Data. The sensor output are high resolution 24 bit ADC. Internal processing removes compensation tasks from the host
Wiring the ADNS 3050 Optical Navigation Sensor with Microcontroller
This is Avago Technologies ADNS 3050 Module, ADNS 3050 is small form factor entry-level gaming optical navigation sensor. It is packed in an 8 pin staggered dual in line package DIP. It is capable of high speed motion detection typically
Wiring the Winbond W25Q80BV / W25QXX SPI Serial Flash Memory with Microcontroller
The Winbond Flash Memory provides extended megabits and bytes serial flash, used for storage on chip solution system with limited space, pins and power. The W25Q series provides flexibility and enhance performance beyond ordinary Serial Flash Devices. This device are