In this illustration we will going to wire the ATTINY85 to control the OLED Screen using i2C Bus on ATTINY85 Microcontroller, I will just give an introduction what is ATTNY85 Microcontroller. The ATTINY 25,45, and 85 is a low power
Didispark ATTiny85 with Ultrasonic HC SR04 Sensor
In this illustration we will going to wire the Digispark ATTiny Development Board with HC-SR04 Ultrasonic range detector, as our output we will going to use an RGB LED when the objects is near or closer to the sensor the
Wiring the TELAIRE T6713 / T67XX a Carbon Dioxide CO2 sensor
This the Telaire T6713 / T67XX a Carbon Dioxide CO2 sensor for indoor air quality, energy saving application, control of ventilation, environmental purpose, farming, and clinical instrumentation. The T67XX is already factory calibrated sensor than can measure the concentration level
Wiring Sensirion i2C Air Flow Digital Differential Pressure Sensor
This is the SDP (Sensirion Differential Sensor) a series of digital differential pressure sensors suitable for high volume applications. This sensor measure the pressure of air and non-aggressive gases with advance accuracy and no offset drift. This series of sensors
Wiring Sensirion i2C SHWX, SHTCX, SHT3X Temperature Humidity Sensor
This is Sensiron high reliable tested and proven stable temperature and humidity sensor. The SHT is fully calibrated and provide a digital and analog output with an advance series of digital humidity and temperature sensor design for long term stability
The TI SMBus / i2C TMP116/TMP116N Digital Temp. Sensor
This is the TMP116 a high accuracy, low power digital temperature sensor with SMBus and i2c interface from Texas Instruments. This device runs on low power in a high precision temperature sensor with integrated memory. The TMP116 features a 16bit
Water/Liquid Level Data Logging on microSD and RTC
Another project that demonstrate how to build a low cost lake/pond water level logger sensor that can be deployed without an RF communication. however this project works as independent/standalone can be deployed on a remote area intended for science and
Motion Data Logging with RTC / PIR as Stand Alone
This project is intended for implementing a low cost proximity/motion data logger, useful device that can be used on environmental / animal scientific research for school/university studies. However the goal of this project is to build an open source that
Wiring PCA9685 16-Channel/12Bit PWM i2C Bus Controller
This is the PCA9685 develop by XMP semiconductor. The PCA9685 is an i2C / TWI bus controller capable of driving 16 channels PWM controller. Suitable for driving servos and LED. Each LED output has its own 12-bit resolution at 4096
Wiring Panasonic PaPIRs PIR Pyroelectric Motion Sensor
PIR (Passive Infrared or Pyroelectric) Motion Sensor from Panasonic has industrial grade, highly reliable and precise and accurate sensor. The Panasonic PIR motion sensor has three series that suit your requirements. The Panasonic EKMB (WL) has a low current consumption
Wiring LM393 as Steam, Water Vapor, Moisture Sensor
This is a steam sensor which is can sense a rain drops, steam or water vapor suitable of IOT project. The illustration below use LM3XX as differential comparators that drives the difference between the two inputs. The LM3XX device is
Wiring DRV8880 2A Stepper Motor Driver With AutoTune
The DRV8880 is a 2A stepper motor driver with integrated auto tune, support STEP/DIR interface up to 1~16 micro stepping indexer that runs on 6.5 to 45v range. These device can be use in Automatic Teller, Money Handling Machine, Security