Wiring 2N7000, AN10441 as Logic Level Converter for i2C Protocol Devices

Other micro-controller uses 5v as standard input voltage, many latest device modules, popular sensors, GPS, RF modules, Flash Memories, SPI storage, Display, use 3 to 3.3v  most of this devices requires logic level conversion to protect them from high voltage

Wiring the VL53L0X ToF Accurate Laser Ranging / Distance Measuring Sensor on Microcontroller

This is the VL53LOX breakout module a type of ToF (Time-of-Flight) laser ranging sensor in smallest package capable of delivering accurate distance measurements whatever the object reflectance compared to conventional measuring sensor, the VL53LOX can measure a distance up to

Wiring MOC78XX, H206, GP1A57HRJ00F Opto-interrupter for Motor Speed, Direction, Detection Control

This is the photo interrupter also known as photogate, photodiode, or phototransistor. Phototransistors are specially designed transistors with the base region exposed these transistors are light sensitive, especially when an infrared source of light is being used. Phototransistors it has

Wiring The LIDAR (Light Detection and Ranging Sensor) Remote Sensing with Micro-controller

This is another illustration that demonstrate how to wire the LIDAR Sensor on your Microcontroller. LIDAR (Light Detection and Ranging) is a remote sensing device which is capable capture geographical information. LIDAR data is often collected by the survey of

Wiring the ITG3200 / ADXL345 / HMC5883L 9DOF RAZOR IMU AHRH UART SPI i2C Communication

This is the 9DOF (Degrees Of Freedom) IMU (Inertial Measurement Unit) module that has 3 integrated sensor in one module board the ITG-3200 (Triple Axis Digital Output Gyroscope), ADXL345 (13bit Resolution ±16g Triple Axis Accelerometer), HMC5883L (Triple Axis, Digital Magnetometer)

Page 1 of 3123