This is the D7S Seismic Earthquake Sensor. D7S sensor uses 3-AXIS acceleration sensor developed by OMRON’s unique SI (Spectral Intensity) value calculation algorithm which it has a high correlation with SIS Seismic Intensity Scale that indicates the magnitude of an
This is the AS3935 Sensor a programmable and fully integrated lightning sensor IC that detects the presence and approach of potential hazardous lightning activity in the area and provides an estimation on the distance to the head of the storm.
This is the Silicon Labs Si7021 i2C Humidity / Temperature Sensor. Si7021 is a monolithic CMOS IC that integrates humidity / temperature sensor elements this device has an analog to digital converter, signal processing, calibration data, and an i2C interface.
Another project that demonstrate how to wire the ESP82366 Module and 16×2 i2C LCD as a network monitoring device to observe the network web/app server communication and can handle many host depend on your requirements. ESP8266 is a WiFi full
NTP (Network Time Protocol) is a clock protocol that synchronize between servers and computers system, attach to the data networks. NTP was designed by David Millis at the University of Delaware. NTP is envisioned to synchronize all participating computers of
Another illustration how to wire the ESP8266 as server and client mode, therefore there is no need to use a router or smart phones to interact/communicate to the ESP8266, this is direct communication between 2 ESP module as server and
This is A7, A6C, and A6 is a GSM/GPRS/GPS Module that Supports GSM, GPRS, and GPS Quad-Band 850/900/1800/1900 MHz 2G GSM network worldwide with an SMS, GPRS Class 10 Data Service, and GPS feature and supports digital audio and analog
ESP32S Wifi Bluetooth combo module is ultra performance that is high ultra low-power consumption Wi-Fi and Bluetooth wireless platform based on ESPRESSIF ESP32 chipset. ESP-32S dual-core 448 KByte ROM | 520 KByte SRAM | 16 KByte SRAM in RTC |
This is the HC-21 an embedded Wi-Fi UART module built IEEE802.11 wireless network protocol stacks and TCP/IP protocol to achieve conversation between serial data to wireless network communication. The HC21 can be connected via wireless to wireless without any support
Another illustration on ESP8266 12/12E as smart metering using liquid/Water flow sensor. Water flow sensor is capable of measuring flows in pipes from 0.15 to 60 liters per minute, suitable for measuring water consumption or detecting pipe leakage and monitoring
Another illustration that demonstrate how to use the ESP8266 as a web-based Soil Moisture / Temperature and Humidity Monitor. If you’re new to ESP8266 please refer to this link. There are 3 main component are used to this project. The
This is a wireless remote controlled robot using ESP8266 with L298N or L293D H-Bridge Motor Controller along with your Arduino Microcontroller, This bot is also tested in ESP8266 7, 12, 12E with or without Microcontroller. As you can see the